šŸŽ‰ Up to 70% Off Selected ItemsShop Sale
HomeStore

Cables To Go 8 Ohm 50W Audio Amplifier - Plenum Rated

Product image 1

Cables To Go 8 Ohm 50W Audio Amplifier - Plenum Rated

The 8 Ohm 50W Audio Amplifier, #40880

  ā€¢ Frequency Response: 20Hz to 20 KHz (+1dB -3dB)  ā€¢ Signal Noise: >80dB  ā€¢ Input Sensitivity: -10dBV (316mV)  ā€¢ Amplifier Type: Class D  ā€¢ External Power Supply: 100VAC to 240VAC
The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications

Noise Reduction

Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

Standby Mode

After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.

Accessory Power Output

The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink A/V Controller.Ā 

$606.99
Cables To Go 8 Ohm 50W Audio Amplifier - Plenum Ratedā€”
$606.99

Product Information

Shipping & Returns

Description

The 8 Ohm 50W Audio Amplifier, #40880

  ā€¢ Frequency Response: 20Hz to 20 KHz (+1dB -3dB)  ā€¢ Signal Noise: >80dB  ā€¢ Input Sensitivity: -10dBV (316mV)  ā€¢ Amplifier Type: Class D  ā€¢ External Power Supply: 100VAC to 240VAC
The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications

Noise Reduction

Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

Standby Mode

After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.

Accessory Power Output

The accessory power output provides 12 Volts DC and 500 mAmps. This makes the amplifier the perfect match for a controller such as the TruLink A/V Controller.Ā